Elija el país para la entrega del envío

RockBoard RBO POW BLO ISO 10V2 Adaptador de fuente de alimentación

Código de producto: 1338174

RockBoard RBO POW BLO ISO 10V2 Adaptador de fuente de alimentación

Código de producto: 1338174

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably. 10…
  • Voltaje: 18V, 9V
  • Corriente (mA): 2000
  • Corriente: 2000 mA
  • Número de salidas: more than 8
  • Polaridad: Center Minus

RockBoard RBO POW BLO ISO 10V2 Adaptador de fuente de alimentación

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably.

  • 10 galvanically isolated outputs (8 x 9V at 150 mA + 2 x 18V at 400 mA) for powering a full pedalboard from one unit
  • Advanced filter technology eliminates high-frequency noise; external transformer blocks low-frequency interference
  • Per-outlet short-circuit protection with status LEDs isolates faults without shutting down the rest of the rig
  • Includes 18V DC adapter with multi-regional plugs, 10 flat power cables, plus voltage and current doubler Y-cables
Aún no está disponible una descripción más detallada en su idioma. La descripción en inglés podría ayudar.

Clean Isolated Power for a Full Pedalboard

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that replaces a tangle of single adapters with one compact unit. Ten transformer-isolated outputs feed up to ten pedals at once, so a complete board of drives, modulations, delays and digital units can run from a single mains feed. The ISO Power Block V10 is the right choice for guitarists, bassists and keyboard players who need quiet, reliable power for a medium-to-large pedalboard without ground-loop hum.

Standout Engineering

Each output sits behind its own isolation transformer, so noise from one pedal cannot bleed into another. Advanced filtering technology in every slot suppresses high-frequency interference, while the external 18V power adapter keeps low-frequency noise away from the audio path. Per-outlet short-circuit protection with a status LED means a single faulty cable will not bring the rest of the rig down.

Power Outputs and Voltage Configuration

  • 9V Outputs: 8 isolated slots, 150 mA each — handles standard analog pedals and most digital units
  • 18V Outputs: 2 isolated slots, 400 mA each — covers power-hungry digital and dual-voltage pedals
  • Total Current Capacity: 2,000 mA — enough headroom for a fully loaded board

Filtering and Protection

  • Galvanic Isolation: transformer-isolated per output — eliminates ground loops between pedals
  • HF Filtering: advanced filter technology in each slot — kills digital whine and RF interference
  • Short-Circuit Protection: per-outlet with status LED — a fault on one slot leaves the others running

Physical Specs and Package Contents

  • Dimensions: 123 x 70 x 26 mm — slim enough to mount beneath a RockBoard or any standard board
  • Weight: 180 g — light enough not to weigh down a touring rig
  • Connector: 2.1 x 5.5 mm barrel, center negative — the industry-standard stompbox plug
  • Included: 18V DC adapter with EU/UK/US/AU plug adapters, 10 x 60 cm flat power cables, voltage doubler Y-cable (blue), current doubler Y-cable (white)

Propósito
Funciones

Número de salidas

more than 8

Entradas y salidas

Polaridad

Center Minus

Paquete

Contenido del paquete

Adaptador, Cable de alimentación, Y-Cable

Fuente de alimentación

Tipo de cargador

Fuente de alimentación

Voltaje

9V, 18V

Corriente

2000 mA

Tipo de enchufe

Barrel

Fuente de alimentación

Adaptador

Accesorio

UK/UE Fuente de alimentación incluida

Sí

Dimensiones y peso

Ancho (mm)

70

Profundidad (mm)

123

Altura (mm)

26

Peso neto (kg)

0,18

País

Hecho en

China

Documentos

Instrucciones de uso
Información del fabricante
Fabricante:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Alemania
Persona responsable:
Warwick GmbH & Co Music Equipment KG
Instrucciones de seguridad

Consulta el manual del usuario para conocer las instrucciones de seguridad específicas de este producto.